Bosch GWS 7-115 - Tool Specifications; Angle Grinder Specifications; Noise and Vibration Information

EURO • Printed in Germany • BA 1 609 929 C85 • GWS 7-14-1000 • OSW 12/01
English - 1
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 88 dB (A); sound
power level: 101 dB (A).
Wear hearing protection!
The typical weighted acceleration is 5.0 m/s
2
.
When using the auxiliary handle with vibration
absorption, the hand/arm vibration of the power
tool used is typically less than 2.5 m/s
2
.
Tool Specifications
Angle Grinder GWS 7-115 GWS 7-125 GWS 9-125
Order number 0 601 800 ... 0 601 800 048 0 601 801 ...
Rated power* [W] 750 750 900
Output power* [W] 450 450 520
No-load speed [rpm] 11 000 11 000 11 000
Grinding disk dia. [mm] max. 115 max. 125 max. 125
Grinder spindle threads M 14 M 14 M 14
Starting current limiter – – –
Constant Electronic Control – – –
Speed preselection – – –
Weight (without accessories) approx. [kg] 1.55 1.55 1.60
Protection class / II / II / II
Angle Grinder GWS 10-125 C GWS 1000 GWS 10-125 CE
Order number 0 601 802 ... 0 601 802 ... 0 601 803 ...
Rated power* [W] 1 020 1 020 1 020
Output power* [W] 600 600 600
No-load speed [rpm] 11 000 11 000 2 800–11 000
Grinding disk dia. [mm] max. 125 max. 125 max. 125
Grinder spindle threads M 14 M 14 M 14
Starting current limiter • • •
Constant Electronic Control • • •
Speed preselection – – •
Weight (without accessories) approx. [kg] 1.60 1.60 1.60
Protection class / II / II / II
Angle Grinder GWS 14-125 C GWS 14-125 CE GWS 14-150 C
Order number 0 601 804 ... 0 601 805 ... 0 601 806 ...
Rated power* [W] 1 400 1 400 1 400
Output power* [W] 820 820 820
No-load speed [rpm] 11 000 2 800–11 000 9 300
Grinding disk dia. [mm] max. 125 max. 125 max. 150
Grinder spindle threads M 14 M 14 M 14
Starting current limiter • • •
Constant Electronic Control • • •
Speed preselection – • –
Weight (without accessories) approx. [kg] 1.80 1.80 1.85
Protection class / II / II / II
* The values given are valid for nominal voltages [U] of 230/240 V.
For lower voltages and models for specific countries, these values can vary.
Noise/Vibration Information
GWS 7-14-1000 - Buch Seite 1 Montag, 3. Dezember 2001 10:49 10
14 • 1 609 929 C85 • TMS • 26.11.01