-18-
Assembly
6. Screw in side handle to secure stability
bracket between the tool housing and
handle.
7. Adjust guard to desired depth of cut.
TO REMOVE: Reverse procedure.
INSTALLING DRY DIAMOND WHEEL
(Fig. 12)
1. Place the backing flange on the spindle.
Turn flange until it locks with the base of
the spindle.
2. Place the dry diamond wheel onto the
spindle and align the arbor hole of the
grinding wheel with the shoulder of the
backing flange.
3. Tighten lock nut with supplied lock nut
wrench while holding spindle lock.
TO REMOVE: Reverse procedure.
FIG. 12
Spindle
Lock nut
Backing
flange
Dry
diamond
wheel
Lock nut
Backing
flange
Spindle
Dry diamond
wheel
2610067310_04-21_GWS18V-8.qxp_GWS 4/1/21 10:06 AM Page 18
To Next Page
Loading...
