Bosch Professional GLL 2 - Page 14

14 | English
A
B
180°
– Turn the measuring tool 180°, allow it to level in and mark the point
where the laser lines cross on the opposite wall B (point).
– Position the measuring tool –without rotating it– close to wallB, switch
it on and allow it to level in.
A
B
– Align the height of the measuring tool (using the tripod or by placing ob-
jects underneath as required) so that the point where the laser lines cross
exactly hits the previously marked point on wallB.
1 609 92A 58R | (04.03.2020) Bosch Power Tools