Bosch Professional GST 18 V-LI S - Product Overview and Specifications; Intended Use of the Jigsaw; Product Features Identification; Technical Data

16 | English
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
u In case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
u Do not open the battery. There is a risk of short-circuit-
ing.
u The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u Only use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
GST 18 V-LI S
The power tool is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates and rubber
while resting firmly on the workpiece. It is suitable for
straight and curved cuts. The saw blade recommendations
are to be observed.
GST 18 V-LI B
The power tool is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates and rubber
while resting firmly on the workpiece. It is suitable for
straight and curved cuts with mitre/bevel angles of up to
45°. Note the saw blade recommendations.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Lock-off button for on/off switch (GST18V‑LIB)
(2)
On/off switch
(3)
Battery
A)
(4)
Battery release button
A)
(5)
Hex key (GST18V‑LIB)
(6)
Plastic guide plate
(7)
Base plate
(8)
Pendulum action adjusting lever
(9)
Guide roller
(10)
Saw blade
A)
(11)
SDS lever for saw blade release
(12)
Worklight
(13)
Shock protection guard
(14)
Handle (insulated gripping surface)
(15)
Worklight button (GST18V‑LIS)
(16)
Stroke rate preselection thumbwheel
(GST18V‑LIS)
(17)
Button for battery charge indicator
A)
(18)
Battery charge indicator
A)
(19)
Saw blade receptacle
(20)
Steel glide shoe
A)
(21)
Anti-splinter guard
(22)
Extraction outlet
A)
(23)
Extraction hose
A)
(24)
Base plate screw (GST18V‑LIB)
(25)
Mitre/bevel angle scale (GST18V‑LIB)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless jigsaw GST18 V-LI S GST18 V-LI B
Article number
3 601 EA5 1.. 3 601 EA6 1..
Rated voltage V= 18 18
No-load stroke rate n
0
min
−1
550–2700 0–2700
Stroke mm 23 23
Max. cutting depth
– In wood mm 120 120
– In aluminium mm 20 20
1 609 92A 4TM | (04.04.2019) Bosch Power Tools