To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GST 18 V-LI S and is the answer not in the manual?
General| Battery Voltage | 18 V |
|---|---|
| Battery Type | Li-ion |
| Stroke Length | 26 mm |
| Weight excl. Battery | 1.9 kg |
| Cutting Depth in Wood | 120 mm |
| Cutting Depth in Aluminum | 20 mm |
| Cutting Depth in Steel | 10 mm |
| Cutting Depth in Non-alloyed Steel | 10 mm |
| Vibration Level | 8.5 m/s² |
Read all safety warnings, instructions, illustrations and specifications provided with this power tool.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Power tool plugs must match the outlet. Never modify the plug in any way.
Stay alert, watch what you are doing and use common sense when operating a power tool.
For EU countries: Collect and dispose of power tools and batteries separately and environmentally correctly.
Follow instructions for operation, maintenance, and accessory use to ensure safety and longevity.
Handle batteries according to instructions to prevent damage, fire, or injury.
Ensure tool safety and performance by using qualified repair persons and identical replacement parts.
Hold tool correctly, use workpiece support, keep hands clear, and wait for standstill before releasing.
The power tool is intended for making separating cuts and cut-outs in wood, plastic, metal, ceramic plates and rubber.
Details of the product's components and their numbering as shown in the diagrams.
Table detailing article numbers, voltage, stroke rates, and cutting depths for models.
Provides A-weighted noise levels (sound pressure, sound power) and uncertainty K.
Details vibration total values and uncertainty K for different cutting scenarios.
Remove the battery from the power tool before carrying out work on the power tool.
Use specified chargers. Fully charge the battery before first use for optimal capacity.
Shows battery charge status via LEDs for GBA and ProCORE battery models.
Wear protective gloves. Blades are sharp and can become hot.
Recommended saw blades for various materials and cutting types are listed.
Properly insert blade with SDS lever; eject blade by turning SDS lever fully.
Use glide shoe for sensitive surfaces or metal. Use anti-splinter guard for wood to prevent splintering.
Dust can be harmful; use suitable extraction and wear a mask.
Adjust pendulum action for optimal cutting speed and material adaptation.
Base plate swivels up to 45° for mitre cuts; accessories may need removal.
Slide the charged battery into the tool until it locks securely.
Use the worklight button and on/off switches for tool operation.
Adjust stroke rate using preselection or variable control based on material.
Includes overload protection, working advice, plunge cutting, and coolant use.
Covers optimal battery handling, storage, and routine tool cleaning.
Contact service for maintenance, repair, and spare parts; access information online.
Follow regulations for shipping lithium-ion batteries, especially for third-party transport.
Dispose of machine, batteries, and accessories responsibly via designated recycling channels.
Comply with EU directives for separate collection and environmentally sound disposal of electrical waste.
The manufacturer declares that the products comply with applicable EU directives, regulations, and standards.
Products meet specified directives, regulations, and harmonised standards.
Details of the company responsible for the declaration of conformity and authorized signatories.
