Bosch Professional GST 2000 - Noise;Vibration Information; Measured Values and Protection; Technical Data; Jigsaw Specifications

English | 19
Bosch Power Tools 1 609 929 S92 | (6.7.09)
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 83 dB(A);
Sound power level 94 dB(A). Uncertainty
K=3 dB.
Wear hearing protection!
Vibration total values (triax vector sum)
determined according to EN 60745:
Cutting wood: Vibration emission value
a
h
=6.5 m/s
2
, uncertainty K=1.5 m/s
2
,
Cutting sheet metal: Vibration emission value
a
h
=4.5 m/s
2
, uncertainty K=1.5 m/s
2
.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Technical Data
Jigsaw GST 85 PB
Professional
GST 85 PBE
GST 2000
Professional
Article number
0 601 587 1.. 0 601 587 6..
Stroke rate control
– z
Rated power input
W580580
Output power
W350350
Stroke rate at no load n
0
min
-1
3100 500–3100
Stroke
mm 26 26
Cutting capacity, max.
–in wood
– in aluminium
– in non-alloy steel
mm
mm
mm
85
20
10
85
20
10
Bevel cuts (left/right), max.
°4545
Weight according to EPTA-Procedure 01/2003
kg 2.4 2.4
Protection class
/II /II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
OBJ_BUCH-432-004.book Page 19 Monday, July 6, 2009 8:15 AM