To Next PageTo Next Page
Need help?Do you have a question about the Bosch GST 80 PB and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | GST 80 PB |
| Category | Power Tool |
| Language | English |
Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions may result in electric shock, fire and/or serious injury.
Keep work area clean and well lit. Do not operate in explosive atmospheres. Keep children and bystanders away.
Use correct plugs, avoid body contact with earthed surfaces, do not expose to rain or wet conditions, do not abuse the cord.
Stay alert, use PPE, prevent unintentional starting, do not overreach, dress properly, use dust extraction, do not let familiarity cause complacency.
Do not force the tool, use the correct tool, do not use if switch is faulty, disconnect power before adjustments, store idle tools safely, maintain tools.
Have power tool serviced by a qualified repair person using only identical replacement parts.
Safe blade handling, preventing kickback, pre-operation checks for safe use.
Intended use of the tool and overview of its components and their functions.
Details technical specifications, noise, and vibration levels for user safety.
Precautions and steps for changing blades, and advice on choosing the right blade.
Instructions for fixing blades securely and using the anti-splinter guard.
Health hazards from dust, workplace safety, and pendulum action settings for cutting.
How to set mitre/bevel angles and move the base plate for edge cuts.
Using the blower for visibility and paying attention to mains voltage.
On/off functions, stroke rate control, and essential safety practices during operation.
Guidance on plunge cutting and parallel/circle cutting with accessories.
Keeping the tool clean, cord replacement, lubrication, and wear checks.
Information on obtaining support, spare parts, and environmentally friendly disposal.
Recommendations for speed, precision, progressive, clean, and extra-clean wood cuts.
Recommendations for speed, precision, clean, and extra-clean hardwood cuts.
Recommendations for special cuts in laminate.
Recommendations for progressive cuts in wood and metal.
Recommendations for flexible, speed, precision, progressive, special aluminium, and endurance stainless steel cuts.
Recommendations for clean cuts in PP, PVC, PMMA, PC, carbon fiber, HPL, and plastic composites.
Recommendations for precision soft material, special soft material, ceramic, and fiber plaster cuts.
Product compliance with EU directives and standards, including article numbers.
