To Next PageTo Next Page
Need help?Do you have a question about the Bosch GST 85 PE and is the answer not in the manual?
Identifies and explains the numbered parts of the machine for user reference.
Defines the machine's purpose and suitable applications for cutting various materials.
Presents measured noise and vibration levels according to EN 60745 standards.
Provides essential safety guidelines for operating the power tool to prevent injury and electric shock.
Details the procedure for safely replacing and inserting saw blades, including protective measures.
Guides on connecting power, switching the tool on/off, and setting the stroke rate for operation.
Explains how to adjust pendulum action for optimal cutting speed, capacity, and pattern.
Describes the function and adjustment of the sawdust blower and the role of the contact protector.
Guides on setting cutting angles, including mitre adjustments, and offsetting the base plate.
Information on replaceable covers, splinter guard, and cover guard for surface protection.
Details on connecting the machine to a vacuum cleaner for effective dust removal.
Provides advice for tight curves, sawing metal, and plunge cutting techniques for better results.
Instructions for keeping the machine clean, safe, and in good working order through regular maintenance.
Information on obtaining spare parts and contacting customer support for assistance.
Guidelines for recycling machine, accessories, and packaging for environmental friendliness.
Contact details and website for customer support and spare parts information.
Identifies and explains the numbered parts of the machine for user reference.
Defines the machine's purpose and suitable applications for cutting various materials.
Presents measured noise and vibration levels according to EN 60745 standards.
Provides essential safety guidelines for operating the power tool to prevent injury and electric shock.
Details the procedure for safely replacing and inserting saw blades, including protective measures.
Guides on connecting power, switching the tool on/off, and setting the stroke rate for operation.
Explains how to adjust pendulum action for optimal cutting speed, capacity, and pattern.
Describes the function and adjustment of the sawdust blower and the role of the contact protector.
Guides on setting cutting angles, including mitre adjustments, and offsetting the base plate.
Information on replaceable covers, splinter guard, and cover guard for surface protection.
Details on connecting the machine to a vacuum cleaner for effective dust removal.
Provides advice for tight curves, sawing metal, and plunge cutting techniques for better results.
Instructions for keeping the machine clean, safe, and in good working order through regular maintenance.
Information on obtaining spare parts and contacting customer support for assistance.
Guidelines for recycling machine, accessories, and packaging for environmental friendliness.
Contact details and website for customer support and spare parts information.
General| Input power | 580 W |
|---|---|
| Cable length | 4 m |
| Output power | 350 W |
| Power source | AC |
| Stroke height | 26 mm |
| No-load stroke rate | 3100 spm |
| Cutting depth in wood | 85 mm |
| Cutting depth in aluminum | 20 mm |
| Cutting depth in non-alloyed steel | 10 mm |
Weight and Dimensions| Weight | 2400 g |
|---|
