To Next PageTo Next Page
Need help?Do you have a question about the Bosch PSB 600 RE and is the answer not in the manual?
General| Power | 600 W |
|---|---|
| No-load speed | 0 - 3000 rpm |
| Impact rate | 0 - 48000 bpm |
| Chuck capacity | 1.5 - 13 mm |
| Weight | 1.7 kg |
| Drilling capacity in wood | 30 mm |
| Drilling capacity in steel | 13 mm |
| Drilling capacity in masonry/concrete | 13 mm |
| Chuck type | Keyless chuck |
| Length | 32 cm |
Technical data and performance metrics for various impact drill models.
Details on mounting and adjusting the auxiliary handle and depth stop for drilling.
How to use the spindle lock and insert tools using keyless or key chucks.
Steps for using and locking the keyless chuck for tool changes.
Essential safety guidelines for operating the power tool to prevent accidents.
Safety measures for mains power, cables, and RCDs.
Guidelines for holding the tool, stance, and avoiding hazards during use.
Describes the intended purposes of the impact drill, including drilling and screwdriving.
Ensure the power source voltage matches the tool's requirements.
How to start, stop, and lock the tool's operation.
Adjusting the rotational speed before or during operation.
Step-by-step guide to remove the drill chuck.
Instructions for securely mounting the drill chuck with the correct torque.
How to select between two speed ranges on the PSB 650-2 model.
How to switch between clockwise and counter-clockwise rotation.
Selecting the correct mode for drilling, screwdriving, or impact drilling.
Guidance on selecting speed and torque based on the material being worked.
Keeping the tool and ventilation slots clean for safe and efficient operation.
Information on authorized service centers and spare parts ordering.
Guidelines for environmentally friendly disposal and recycling of the tool and packaging.
Information on typical noise pressure and power levels.
Details on the typical weighted acceleration of the tool.
Declares conformity with relevant standards and directives.
