Product description and
specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding and polishing of
wood, filler and varnished surfaces. It is particularly well-
suited for profiles, corners and hard-to-reach areas.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
On/off switch
(2)
Complete dust box (Microfilter system)
(3)
Sanding plate
(4)
Sanding sheet
A)
(5)
Handle (insulated gripping surface)
(6)
Extraction outlet
(7)
Filter element (Microfilter system)
(8)
Dust extraction hose
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Multi sander PSM 80 A PSM 100 A
Article number
3 603 C54 0.. 3 603 CB7 0..
Rated power input W 80 100
No-load speed rpm 13,000 13,000
No-load orbital stroke rate rpm 26,000 26,000
Sanding sheet surface cm
2
104 104
Orbit diameter mm 1.4 1.4
Weight according to EPTA Procedure 01:2014 kg 0.90 0.90
Protection class / II / II
The specifications apply to a rated voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/vibration information
Noise emission values determined according to
EN62841-2-4.
Typically the A-weighted noise level of the power tool is:
Sound pressure level 83 dB(A); sound power level 94
dB(A). Uncertainty K=3dB.
Wear hearing protection
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according to EN62841-2-4:
a
h
= 6.5 m/s
2
, K = 1.5 m/s
2
,
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
and may be used to compare power tools. They may also be
used for a preliminary estimation of vibration and noise
emissions.
The given vibration level and noise emission value represent
the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Assembly
u Pull the plug out of the socket before carrying out any
work on the power tool.
Dust/chip extraction
The dust from materials such as lead paint, some types of
wood, minerals and metal can be harmful to human health.
Touching or breathing in this dust can trigger allergic reac-
tions and/or cause respiratory illnesses in the user or in
people in the near vicinity.
Certain dusts, such as oak or beech dust, are classified as
carcinogenic, especially in conjunction with wood treatment
additives (chromate, wood preservative). Materials contain-
ing asbestos may only be machined by specialists.
English | 11
Bosch Power Tools 1 609 92A 49N | (29.05.2018)
To Next Page
Loading...
Need help?
General
