To Next PageTo Next Page
Need help?Do you have a question about the Bosch PSS 200 A and is the answer not in the manual?
General| Soft grip | Yes |
|---|---|
| Type of sander | - |
| Eccentricity | 1 mm |
| Idle speed (max) | 24000 RPM |
| Oscillating orbit diameter | 2 mm |
| Sanding surface | 0.0167 m² |
| Input power | 200 W |
| Output power | 125 W |
| Power source | AC |
Weight and Dimensions| Weight | 1600 g |
|---|---|
| Sanding plate size (WxD) | 92 x 182 mm |
The machine is intended for dry sanding of wood, plastic, filler and coated surfaces.
Lists and describes the components of the sander and its accessories, referring to diagram labels.
Provides detailed specifications for different sander models including article number, power, speed, and dimensions.
Details measured noise and vibration emission levels according to EN 60745 standards.
States conformity with EU directives and lists relevant standards for the product.
Instructions for attaching and removing sanding sheets, with specific steps for Velcro and clamp systems.
Guidance on choosing sanding sheets based on material and desired finish (grain size).
Information on health risks from dusts and recommendations for dust extraction systems.
Instructions for attaching, emptying, and cleaning the integrated dust box and filter element.
Instructions for mounting a vacuum hose onto the extraction outlet for external dust collection.
Ensures correct mains voltage and describes how to start and stop the machine.
Explains how to use the thumbwheel to adjust the orbital stroke rate for optimal sanding.
Tips for safe operation, including waiting for standstill and maintaining consistent sanding pressure.
Guidelines for keeping the machine clean and instructions for obtaining repairs and spare parts.
Contact information for customer service, repair, and spare parts inquiries in various regions.
