Bosch PSS 200 AC - Page 15

English | 15
Bosch Power Tools 2 609 004 199 | (27.1.10)
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The machine is intended for dry sanding of
wood, plastic, filler and coated surfaces.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Thumbwheel for orbit frequency preselec-
tion(PSS 250 AE)
2 On/Off switch
3 Dust box, complete (micro filtersystem)
4 Sanding-sheet clamp
(PSS 190 AC/PSS 200 AC/PSS 250 AE)
5 Sanding plate
6 Sanding sheet
7 Handle (insulated gripping surface)
8 Extraction outlet
9 Filter element (micro filtersystem)
10 Vacuum hose*
11 Perforating tool*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 82 dB(A);
Sound power level 93 dB(A). Uncertainty
K=3dB.
Wear hearing protection!
Orbital sander PSS 190 AC PSS 200 A PSS 200 AC PSS 250 AE
Article number
3 603 ... C40 1.. C40 0.. C40 1.. C40 2..
Rated power input
W 190 200 200 250
Preselection of orbital stroke
rate
– –– z
No-load speed
min
-1
12000 12000 12000 7000 – 12000
No-load orbital stroke rate
min
-1
24000 24000 24000 14000 – 24000
Orbit diameter
mm 2.0 2.0 2.0 2.0
Sanding sheet dimensions
— Adhesion via Velcro backing
— Attachment via clamping
mm
mm
–
93 x 230
93 x 185
–
–
93 x 230
93 x 185
93 x 230
Weight according to
EPTA-Procedure 01/2003
kg 1.6 1.6 1.6 1.6
Protection class
/II /II /II /II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
OBJ_BUCH-60-003.book Page 15 Wednesday, January 27, 2010 2:49 PM