To Next PageTo Next Page
Need help?Do you have a question about the Bosch pst 800 PEL and is the answer not in the manual?
General| Input power | 530 W |
|---|---|
| Output power | 290 W |
| Power source | AC |
| AC input voltage | 230 V |
| No-load stroke rate | 3000 spm |
| Sound power level | 96 dB |
| Sound pressure level | 85 dB |
| Cutting depth in wood | 80 mm |
| Idle stroke rate (min) | 500 spm |
| Vibration level (wood) | 7 m/s² |
| Sound level uncertainty | 3 dB |
| Vibration level (steel) | 13 m/s² |
| Cutting depth in non-alloyed steel | 5 mm |
| Vibration level uncertainty (wood) | 1.5 m/s² |
| Vibration level uncertainty (steel) | 3 m/s² |
| Saw blade included | Yes |
| Handle type | Top handle |
| Product color | Black, Green, Red |
| Orbital action | - |
Weight and Dimensions| Weight | 2000 g |
|---|
Keep area clean, avoid hazards, keep bystanders away.
Ensure proper grounding, avoid wet conditions, protect cords.
Stay alert, use PPE, prevent accidental starts, proper attire.
Proper usage, maintenance, and keeping tools sharp for safe operation.
Emphasizes professional servicing and identical replacement parts.
Warnings unique to jigsaw operation, like blade contact.
Wait for tool stop, handle damaged cables, specific country plug/RCD advice.
Defines the machine's purpose and capabilities for cutting various materials.
Overview of the jigsaw's components and their functions.
Detailed specifications including power, capacity, weight, and protection class.
Details noise levels, vibration exposure, and hearing protection advice.
Product conformity statement with relevant EU directives and standards.
Covers saw blade replacement, storage, and splinter guard attachment.
Guidance on choosing the correct saw blades for different materials and cuts.
Instructions for attaching and using the "Cut Control" system for precise guiding.
Health risks of dust and the importance of using dust extraction.
Mounting dust cover and connecting the dust extraction system.
Explains and guides on using the four orbital action settings for optimal cutting.
How to swivel the base plate for mitre cuts up to 45 degrees.
Using "Cut Control" marks for precise 0° and 45° bevel cuts.
How to offset the base plate for sawing close to edges.
How to operate the sawdust blower to clear the cutting line.
Instructions for operating the On/Off switch and controlling stroke rate.
Tips for plunge cutting, workpiece support, and using parallel guide/circle cutter.
Advice on coolant use and machine cleaning/lubrication.
Steps for cleaning, ventilation, and lubricating the tool.
Information on support, spare parts, and contact details for service.
Instructions for environmentally friendly recycling of the tool and packaging.
