English – 10
– SPORT/eMTB:
SPORT: Powerful assistance, for mountain biking
and for cycling in urban traffic
eMTB: Optimum assistance whatever the terrain,
rapid acceleration when starting from a standstill,
improved dynamics, top performance (eMTB is
only available in combination with drive units
BDU250P CX, BDU365, BDU450 CX and BDU480
CX. This also requires a software update.)
– TURBO: Maximum assistance even at high ca-
dences, for biking sports
To increase the assistance level, briefly press the
button+ (6) on the on-board computer repeatedly
until the required assistance level appears on the in-
dicator (i). To decrease the assistance level briefly
press the button– (5).
If the display is set to TRIP, TOTAL or RANGE, the se-
lected assistance level will only be shown briefly(for
approx. one second) on the display when switching
over.
Switching bike lights on/off
On the model in which the bike lights are powered by
the eBike, pressing the button+ for a medium
length of time will switch on the front and rear lights
simultaneously. A medium-length press of the but-
ton+ will switch the bike lights off again.
The lighting symbol (h) is displayed when the light is
on.
Before starting each journey, check that your bike
lights are working correctly.
The on-board computer saves the light status and ac-
tivates this saved status accordingly after a restart.
Switching the bike lights on and off has no effect on
the backlighting of the display.
1 270 U20 XBP | (14.03.2023) Bosch eBike Systems
To Next Page
Loading...
