English – 3
– ECO: Effective assistance with maximum efficiency, for
maximum range
– TOUR: Steady assistance, long range for touring
– SPORT/eMTB:
SPORT: Powerful assistance, for mountain biking and
cycling in urban traffic
eMTB: Optimum assistance whatever the terrain, rapid
acceleration when starting from a standstill, improved dy-
namics and top performance (eMTB only available in
combination with the drive units BDU250P CX, BDU365,
BDU450 CX and BDU480 CX. A software update may be
required.)
– TURBO: Maximum assistance even at high pedalling
speeds, for sport cycling
To increase the assistance level, briefly
press the but-
ton+ (6) on the on-board computer repeatedly until the re-
quired assistance level appears on the indicator (i). To de-
crease the assistance level briefly
press the button– (5).
If the display is set to TRIP, TOTAL or RANGE, the selected
assistance level will only be superimposed briefly(for ap-
prox. one second) on the display when switching over.
Switching bicycle lights on/off
For the model which has the bike lights powered by the
eBike system, a medium-length press
of the button+ will
switch on the front and rear lights simultaneously. To switch
off the bike lights, press and hold
the button+.
The lighting symbol (h) is displayed when the light is on.
Check that your bike lights are working correctly before
every use.
The on-board computer saves the light status and activates
this saved status accordingly after a restart.
Switching the bike lights on and off has no effect on the
backlighting of the display.
Bosch eBike Systems 1 207 020 XBP | (11.03.2020)
To Next Page
Loading...
