Need help?Do you have a question about the Bosch Rexroth Hagglunds CA Series and is the answer not in the manual?
Details the format of safety instructions, including signal words, risk types, consequences, and precautions.
Defines risk categories (Danger, Warning, Caution, Notice) and their associated warning signs and meanings.
Explains symbols used in the documentation to aid understanding, such as information icons and numbered instructions.
Defines proper usage and identifies actions considered improper for the Hägglunds motor.
Specifies the required qualifications and knowledge for personnel handling the Hägglunds motor.
Provides general safety rules, including accident prevention, environmental protection, and product operation.
Details critical safety instructions specific to the Hägglunds motor, covering pressure, loads, and system safety.
Outlines the importance and use of personal protective equipment for safe operation and maintenance.
Guidelines to prevent damage from incorrect handling, mechanical load, and insufficient lubrication.
Procedures for handling hydraulic fluids to prevent contamination, ensure proper cleaning, and avoid environmental issues.
Instructions for correct disposal of the motor, fluids, and packaging to prevent environmental pollution.
Details the information found on the product identification label, including type code, serial number, and max pressure.
Explains the ATEX classification and marking details found on the product identification label.
Describes the requirement for a cross-over valve to limit pressure spikes in hydraulic systems exceeding 350 bar.
Explains the need for external ground connection for voltage equalization and the minimum cable area required.
Provides detailed instructions and examples for grounding the Hägglunds motor, including parts and connection points.
Details the PT100 type temp sensor and its electrical connection requirements for explosive zones.
Describes the SPDB2 speed encoder, its flame proof certification, and electrical connection details.
Explains the inductive speed encoder, its Namur intrinsic safety, and electrical connection via a switching amplifier.
To Next Page
General