Bosch ROTAK 34 C User Manual (English)

Questions and Answers:

Y
yowensAug 12, 2025
Why Bosch ROTAK 34 C Lawn Mower motor refuses to start?
- J
  Jaime LarsenAug 12, 2025
  If the Bosch Lawn Mower motor won't start, several factors could be at play. First, ensure the power is turned on and the mains socket is working by trying another socket. Inspect the extension cable for damage, replacing it if necessary. Check the fuse and replace it if it's faulty or blown. Also, check underneath the lawn mower for any clogging, wearing protective gloves, and clear it out. The motor protector might have activated; allow the motor to cool and increase the cutting height. Finally, ensure you're not mowing too low for the current conditions and increase the cutting height.
G
gthompsonAug 18, 2025
What to do if my Bosch Lawn Mower functions intermittently?
- B
  Brenda BlackAug 18, 2025
  If your Bosch Lawn Mower functions intermittently, the issue might stem from a damaged extension cable, which you should inspect and replace if needed. It could also be due to the motor protector being activated; in this case, allow the motor to cool down and increase the height of cut. For damaged internal wiring, contact a service agent.
M
Meredith LoweAug 23, 2025
How to fix excessive vibrations/noise in Bosch ROTAK 34 C Lawn Mower?
- J
  John ChangAug 23, 2025
  Excessive vibration or noise in your Bosch Lawn Mower can be caused by a loose blade nut/bolt; tighten it to 17 Nm. Another cause could be a damaged cutting blade, which should be replaced.
L
Luis MartinAug 29, 2025
Why Bosch Lawn Mower motor labours?
- P
  Penny PittsAug 29, 2025
  If the motor of your Bosch Lawn Mower labours, first check underneath the mower for any clogging and clear it out wearing protective gloves. Ensure the blade is fitted correctly and not upside down. Also, make sure the blade nut/bolt is tightened to 17 Nm. If the blade is not rotating when the product is switched on, switch off the lawn mower.
W
Wesley FosterSep 4, 2025
Why Bosch ROTAK 34 C Lawn Mower leaves ragged finish?
- T
  Travis PriceSep 4, 2025
  A ragged finish from your Bosch Lawn Mower could be due to the cutting height being too low; increase it. Alternatively, the cutting blade might be blunt and require replacement.