en HomeConnect
40
Basic setting Selection Description
Efficient Dry off
On in all programmes
On with Eco 50°
1
Activate or deactivate automatic opening of the
appliance door during the drying phase.
If the function has been activated, the running
time may increase.
→"Efficient Dry", Page12
Wi-Fi on
off
Switch the wireless network connection on or off.
The basic setting "Wi-Fi" is only available once
the appliance is connected to the HomeConnect
app.
→"HomeConnect ", Page40
Remote Start off
Manual
Permanent
Activate or deactivate
→"Remote Start ", Page41.
This basic setting is not available until after you
have connected the device with the HomeCon-
nect app.
→"HomeConnect ", Page40
Greeting on
1
off
Switch display of the brand name logo on or off
when the appliance is switched on.
Factory setting Reset Restore changed settings to the factory settings.
The settings for initial start-up must be con-
figured.
1
Factory setting (may vary according to model)
Changing basic settings
1. Open the appliance door.
2. Press .
3. To open the basic settings, press
for approx. 3seconds.
4. Press repeatedly until the display
shows the required setting.
5. Press or repeatedly until the
display shows the right value.
You can change several settings.
6. To save the settings, press for
approx. 3seconds.
7. Close the appliance door.
Setting the time
1. To open the basic settings, press
for approx. 3seconds.
2. Press repeatedly until the display
shows "Time setting".
3. Press or repeatedly until the
display shows the required time.
Holding down and will
change the set values in 10-minute
steps.
4. To save the settings, press for
approx. 3seconds.
HomeConnect
HomeConnect
HomeConnect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
HomeConnect app.
The HomeConnect services are not
available in every country. The avail-
ability of the HomeConnect function
depends on the availability of
To Next Page
Loading...
