Bosch SBH4HCX48E - Remote Start, Page

Basic settings en
35
Basic setting Display text Selection Description
Status Light I01
1
I00 - I01 While the programme is running, a
strip of light appears on the left-hand
side of the appliance. If the appli-
ance door is not completely closed,
the strip of light will flash. The pro-
gramme has ended when the strip of
light is no longer visible on the left-
hand side.
Switch Status Light on "I01" or off
"I00".
Tone volume b02
1
b00 - b03 Adjustment of tone volume.
Level "b00" switches the signal tone
off.
Wi-Fi Cn0 Cn0 - Cn1 Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
The basic setting "Wi-Fi" is only avail-
able once the appliance is connec-
ted to the HomeConnect app.
→"HomeConnect ", Page36
Remote Start rc1 rc0 - rc2 Activate or deactivate
→"Remote Start ", Page37.
The following settings are possible:
¡ With the setting "rc0", the func-
tion is permanently deactivated.
¡ With the setting "rc1", the func-
tion can be selected via the
button.
→"Activating Remote Start ",
Page37
¡ With the setting "rc2", the func-
tion is permanently activated.
This basic setting is not available un-
til after you have connected the
device with the HomeConnect app.
→"HomeConnect ", Page36
Factory setting rE Start with
YES
Confirm with
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)