operation en
33
15.4 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note:The additional functions which
can be used depend on the pro-
gramme selected.
▶ Press the button for the relevant
additional function.
a The additional function is set and
the additional function button
flashes.
15.5 Setting timer program-
ming
You can delay the start of the pro-
gramme by up to 24hours.
1. Press .
a "h:01" appears in the display.
2. Use or to set the required
start time for the programme.
3. Press .
a This activates timer programming.
Tip:To deactivate timer program-
ming, press or repeatedly until
"h:00" appears in the display.
15.6 Starting the programme
▶ Press .
a The programme has ended when
the display shows "0:00".
Notes
¡ You can only change a pro-
gramme when running if you can-
cel it.
→"Terminate programme",
Page34
¡ The appliance switches off auto-
matically 1minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
15.7 Activating button lock
The button lock prevents the appli-
ance from being operated accident-
ally or incorrectly while running.
Requirement:A programme has
started. →Page33
▶ Press for approx. 3seconds.
a The button lock is activated and
will be automatically deactivated at
the end of the programme.
a The display shows "CL" when the
appliance is running.
a The button lock remains activated
with a power failure.
15.8 Deactivate button lock
▶ Press for approx. 3seconds.
15.9 Interrupting programme
Note:When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1. Press .
a The programme is saved and the
appliance switches off.
2. Press to resume the pro-
gramme.
To Next Page
Loading...
