en
26
Reassembly:
Insert the filter system and screw down
with the filter cylinder.
Spray arms
Lime and remnants of food in the washing
water can block the nozzles in the spray
arms
24 and 25 and the arm
mountings .
Inspect the nozzles in the spray arms
for blocked holes due to remnants of
food.
If necessary, pull the lower arm 25
upwards and lift it off.
Unscrew the upper spray arm 24 .
Clean both spray arms under running
water.
Refit the spray arms. Ensure that the
lower arm has locked into place and the
upper one is screwed tight.
To Next Page
Loading...
