en-us Basic settings
34
Basic setting Display
text
Selection Description
infoLight® I01
1
I00 - I01 Switch InfoLight on or off.
While the program is run-
ning, a spot of light is pro-
jected onto the floor below
the appliance door. This
light will not be visible if
the appliance is installed
at eye level with the cabi-
net front fitted flush. If the
appliance door is not com-
pletely closed, the spot of
light will flash. The pro-
gram has ended when the
spot of light is no longer
visible on the floor.
Level "I00" switches Info-
Light off.
Signal volume b02
1
b00 - b03 Adjusting the signal vol-
ume.
Level "b00" switches the
signal tone off.
Wi-Fi Cn0
1
Cn0 - Cn1 Switch the wireless net-
work connection on or off.
Level "Cn0" switches the
wireless network connec-
tion off.
Remote Start rc1
1
rc0 - rc2 Activate or deactivate .
The following settings are
possible:
¡ With the setting "rc0",
the option is perma-
nently deactivated.
¡ With the setting "rc1",
the option can be se-
lected via the button.
¡ With the setting "rc2",
the option is perma-
nently activated.
Factory setting rE Starting with
YES
Confirming
with
Restore changed settings
to the factory settings.
The settings for initial use
must be configured.
1
Factory setting (may vary according to model)
To Next Page
Loading...
