Bosch SGX78B55UC - Home Connect Settings; Remote Start; Remote Diagnostics; Software Update

en-us HomeConnect™
36
1. Scan the QR code using the
HomeConnect™ app.
2. Follow the instructions in the
HomeConnect™ app.
15.2 HomeConnect™
settings
Adapt HomeConnect™ to your
needs.
You can find the HomeConnect™
settings in the basic settings for
your appliance. Which settings the
display shows will depend on
whether HomeConnect™ has
been set up and whether the ap-
pliance is connected to your home
network.
15.3 Remote start
You can use the HomeConnect™
app to start the appliance with
your mobile device.
Tip:If you select Remote start
→ Page33 "rc2" with the basic
setting, the remote start function
will be permanently activated and
you can start your appliance with
a mobile device at any time.
Activating remote start
If you have selected remote start
"rc1" with the basic setting, you
can activate the remote start func-
tion on your appliance.
Requirements
¡ The appliance is connected to
your WLAN home network.
¡ The appliance is connected to
the HomeConnect™ app.
¡ With the basic setting Remote
start → Page33 , "rc1" is se-
lected.
¡ A program is selected.
▶
Press ⁠.
If you open the appliance door,
remote start is automatically
deactivated.
a The remote start button
flashes.
Tip:To deactivate remote start,
press ⁠.
15.4 Remote Diagnostics
The Customer Service can access
your appliance via Remote Diag-
nostics if you ask them to do so, if
your appliance is connected to the
HomeConnect™ server and if
Remote Diagnostics is available in
the country where you are using
the appliance.
Tip:Further information and de-
tails about the availability of Re-
mote Diagnostics in your country
can be found in the Service/Sup-
port section of your local website:
www.home-connect.com
15.5 Software update
You can use this function to up-
date the software of your appli-
ance, e.g. for optimization, trou-
bleshooting or safety-relevant up-
dates.
The HomeConnect™ app informs
you about available software up-
dates.