en-us HomeConnect®
36
function depends on the availabil-
ity of HomeConnect® services in
your country. You can find infor-
mation on this at: www.home-con-
nect.com.
To be able to use HomeCon-
nect®, you must first set up the
connection to the WLAN home
network (Wi-Fi
1
) and to the
HomeConnect® app.
The HomeConnect® app guides
you through the entire registration
process. Follow the instructions in
the HomeConnect® app to imple-
ment the settings.
Tips
¡ Consult the HomeConnect®
documents supplied.
¡ Follow the instructions in the
HomeConnect® app as well.
Note:Also note the safety infor-
mation in this instruction manual
and ensure that it is also observed
when operating the appliance us-
ing the HomeConnect® app.
15.1 HomeConnect®
quick start
Connect your appliance to a mo-
bile device quickly and easily.
Setting up the
HomeConnect® app
1. Install the HomeConnect® app
on your mobile device.
2. Start the HomeConnect® app
and set up access for
HomeConnect®.
The HomeConnect® app
guides you through the entire
registration process.
Setting upHomeConnect®
Requirements
¡ The HomeConnect®app is in-
stalled on your mobile device.
¡ The appliance receives signals
from the WLAN home network
(Wi-Fi) at its installation loca-
tion.
¡ The appliance door is closed.
1. Open the HomeConnect® app
and scan the following QR
code.
2. Follow the instructions in the
HomeConnect® app.
15.2 HomeConnect®
settings
Adapt HomeConnect® to your
needs.
You can find the HomeConnect®
settings in the basic settings for
your appliance. Which settings the
display shows will depend on
whether HomeConnect® has
been set up and whether the ap-
pliance is connected to your home
network.
15.3 Remote Start
You can use the HomeConnect®
app to start the appliance with
your mobile device.
Tip:If you select "rc2" in the Ba-
sic settings →
Page35
of this
function, the function is perma-
1
Wi-Fi is a registered trade mark of the Wi-Fi Alliance.
To Next Page
Loading...
