Bosch SGX78C55UC - Troubleshooting Error Codes and Dryness

en-us Troubleshooting
44
Issue Cause and troubleshooting
E:61-03 lights up al-
ternately. Water is
not draining.
Not an appliance error. High loop is missing and/
or debris flushed back into drain hose and
blocked it.
▶ Be sure there is a high loop in the drain hose
and that no debris has flushed back into the
hose.
E:90-01 lights up al-
ternately.
Power voltage is too low.
There is no problem with the appliance.
1. Call an electrician.
2. Have the power voltage and electrical installa-
tion checked by an electrician.
E:92-40 lights up al-
ternately.
Filters are soiled or blocked.
▶ Clean the filters.
→ "Cleaning filters", Page40
A different error
code appears in the
display window.
E:01-00 to E:90-10
There is a technical issue.
1. Press .
2. Pull out the power cord plug of the appliance or
switch off the breaker.
3. Wait at least 2minutes.
4. Insert the power cord plug of the appliance in a
power outlet or switch on the breaker.
5. Switch the appliance on.
6. If the problem occurs again:
‒ Press ⁠.
‒ Turn off the water faucet.
‒ Pull out the power cord plug.
‒ Contact customer service → Page56 and
give the error code.
Dishware is not dry. No rinse aid used or dosage set too low.
1.
Add Rinse aid → Page24 .
2. Set the amount of rinse aid to be dispensed.
→ "Setting the amount of rinse aid", Page25