Bosch SHE3AR Series - Page 15

Rinse Aid en-us
15
1. Press the On/Off button (.
2. Hold down the selection button >
X and press the Start button
h until the display H
indicates •:‹x (x can be any
number). Release both buttons.
3. Press the selection button >
Xuntil the display H shows
§:‹†.
4. Press the selection button <
8to select the desired setting.
5. Press the Start button h to
save the setting.
Turning off rinse aid
indicator
Proceed as described in the section
“Setting the amount of rinse aid
used” and set value to §:‹‹. The
rinse aid indicator is now turned off.
NOTICE
Using no rinse aid or setting the
dispenser to §:‹‹ may result in
longer cycle times consuming more
energy and water. The higher
temperatures and longer cycle times
can damage fine china or glassware.
§:‹„ medium setting
§:‹… medium/high setting
§:‹† high setting
§:‹‡ highest setting
Setting Amount