EasyManua.ls Logo

Bosch SHE43RL5UC - Rinse Aid Management; Adding and Adjusting Rinse Aid

Bosch SHE43RL5UC
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Rinse Aid
To achieve proper drying, always use a liquid rinse aid, even if your detergent contains a rinse aid or
drying additive.
Note: The dishwasher indicates low rinse aid by turning on the Refill Rinse Aid indicator LED (for units with-
out a display) or symbol (for units with a display).
If this light is on, you need to refill the rinse aid dispenser by following the directions below.
Adding Rinse Aid
Open the rinse aid reservoir and add liquid rinse aid by pouring over the arrow.
Turn the arrow to adjust the amount of rinse aid dispensed (see Figure 9).
Wipe up any excess rinse aid that may puddle when the dispenser reservoir
is full.
The indicator light will go out a few moments after the dishwasher door is shut.
Figure 9
To decrease
streaks on glass
To decrease
spots on glass

Related product manuals