Bosch SHEGER55UC - Dishwasher Setup

SHE7ER55UC X X X X X
SHE8ER55UC X X X X X
SHE9ER55UC X X X X X
SGE63E15UC X X X X X
RackMatic
X RackMatic
X RackMatic
X Manual
X X X X X
X X X X X X X
X X X X X X X
X X X X X X
Dishwasher Setup
Water Softening System
Your dishwasher requires soft water to ensure proper washing results and
is equipped with an internal water softening system. However, if you have
a household water softening system, the internal system provided is not
needed.
Table 1 * Water hardness
For the water softening system to function properly, it will need to use the o-_10
dishwasher water softening salt. The amount of salt dispensed can be set _2o1_o
from "H:00" to "H:07". Salt is not required at H:00 (this is the default fac- _0_
tory setting). The amount of salt required depends on the degree of hard-
_90 210
ness of your tap water. See Table 1.
1 Open the door (for hidden controls only). 2_o-_9o
2 Turn the unit on using the [ON/OFF] button. _0o-._7o
3 Hold down the "A" button (see page 4) and press [START] until the :3_o_0
display indicates "H:O0". _0 8_0
4 Release both buttons.
s Press the "C" button to select the desired setting.
6 Save the selected setting by pressing [START] and close the door (for hidden controls).
Using the water hardness test strip
H:O0 ne
H01 y#_
H;02 y_s
H:_3 yes
N:04 ye_
H:05 yes
H:06 yes
H:07 ye_
Ku_ e_nm_;_ Dip b¢_ (1 _), P!on_ b nt
_@n u_ nach w_er a_ _mpare te;z_ d'_u et _m-
t rain a_n. _r t m_n _: _ ! rain. def
_A_dW >10_15,1_
_ _ , adu_#deleau
I
I
I
!
I
I"-I E3 E3 E3 ]
I"-_ E3 E3 I_ ]
I-1 r'q _ m ]
0 H:O0 no
1 H:O0 no
2 H:02 yes
3 H:04 yes
4 H:06 yes