To Next PageTo Next Page
Need help?Do you have a question about the Bosch SHU3307 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | SHU3307 |
| Category | Dishwasher |
| Language | English |
Explanation of the warning symbol used in installation instructions.
Lists potential hazards associated with dishwashers, like shock and sharp edges.
Warns about electric shock hazards and proper grounding procedures.
Details property damage risks from improper water connections.
Notes that no PC boards are handled in repairs, making ESD not a concern.
Confirms no CFCs or refrigerants are used in dishwashers.
States no emissions are related to dishwashers, except potential drain smells.
Confirms that dishwashers do not emit carbon monoxide.
Indicates no government compliance issues.
Details UL certification and Energy Star compliance.
Provides electrical, water pressure, and motor ratings for dishwashers.
Explains the current and older model number coding system.
Shows the location of the serial and model number label on the dishwasher.
Indicates the location of wiring and circuit diagrams for technical reference.
Details the limited lifetime and other warranty periods for Bosch dishwashers.
Refers to installation instructions for location requirements.
Refers to installation instructions for electrical requirements.
Refers to installation instructions for water and drain connections.
Refers to installation instructions for shipping and packaging removal.
Outlines key installation steps like leveling and door reversal.
Provides detailed instructions for dishwasher installation procedures.
Explains how dishwashers operate using circulation pumps and flow-through heaters.
Details the function of key components like circulation pumps and NTC sensors.
Explains the operation of detergent and rinse-aid dispensers.
Describes the function of the top rack only feature and its actuators.
Details the different types of door latches used in Bosch dishwashers.
Explains how aqua sensors affect energy and water usage.
Describes how water fill assemblies ensure proper dishwasher filling.
Explains how to access and remove the water valve by removing the toe kick.
Details different water valve part numbers and upgrade information.
Describes how to access circulation pumps by removing the outer door.
Details accessing circulation pumps by removing the toe kick and side panels.
Explains how to raise the tank side for circulation pump access.
Provides steps for disassembling the circulation pump motor.
Details the procedure for reassembling the circulation pump impeller and housing.
Explains how to remove control modules by bending console tabs.
Details disassembly for SHY56A/66C, SHU 995x & SHV 68 control modules.
Describes how to remove and install display modules on SHY56A/66C models.
Explains Apexx control module removal from the base.
Details removing side panels for Apexx control module access.
Describes raising the tank side for Apexx module access.
Provides steps for sliding out Apexx control modules from the base.
Explains how to remove Apexx display modules from fascia panels.
Describes accessing heaters and NTCs by removing the outer door.
Details accessing heaters and NTCs by removing the toe kick and side panels.
Explains separating the base from the tank for heater access.
Describes separating the base from the tank to access heaters.
Provides steps for removing and installing heater and NTC assemblies.
Details the specific steps for removing and installing the NTC component.
Explains how to remove and install drain pumps by accessing the toe kick.
Provides steps for removing and installing dispenser units.
Describes changes in condensation tubes for UC/12 and later models.
Explains how to disassemble door latches for integrated models.
Details removing and installing door latches and microswitches.
Explains how to access and replace the aqua sensor.
Describes how to access the water fill assembly by removing the left side panel.
Provides instructions on how to enter and use various test programs.
Lists and explains error codes for test programs and customer use.
Details using test programs to measure heater and NTC resistances.
Addresses common washability problems and their causes/solutions.
Troubleshoots issues related to the circulation pump impeller.
Guides troubleshooting for control modules showing a '1' error code.
Provides a flowchart for troubleshooting heater circuit failures.
Addresses issues related to water leaking past dishwasher doors.
Troubleshoots miswired door latches that cause operational issues.
Provides resistance measurements for SHU43C/53A modules.
Provides resistance measurements for SHX33A/43E/46A/B, SHV46C modules.
Presents the wiring diagram for the SHU 30 dishwasher model.
Provides wiring diagrams for SHY56, SHY66, SHX56, SHV66 models.
