702_58300000148618_ara_en_a Page 37 of 42
6.1.4 Viewing customer service program
Test programs differ from model to model. Consult the test program for your model. The one below is an example of a typical test
program.
Push button “B” to skip a step.
DP = Drain pump
MP = Main (circulation) pump
Disp = Dispenser
H = Heater
WSP = Water switch position
VF = Water fill (F1 = water fill switch)
AQS = Aqua sensor
UR = Upper rack
LR = Lower rack
To Next Page
Loading...
