To Next PageTo Next Page
Need help?Do you have a question about the Bosch SHV46C13UC/30 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | SHV46C13UC/30 |
| Capacity | 16 place settings |
| Place Settings | 16 |
| Energy Star Certified | Yes |
| Wash Cycles | 5 |
| Drying System | Condensation Drying |
| Control Type | Electronic |
| Number of Options | 5 |
| Water Filtration System | Yes |
| Delay Start | Yes |
| Soil Sensor | Yes |
| Third Rack | No |
| Stainless Steel Tub | Yes |
| Type | Built-In |
| Width | 23.56 inches |
| Noise Level | 44 dB |
| Decibel Rating | 44 dB |
List of essential tools necessary to perform the dishwasher installation.
List of additional materials to ensure proper and code-compliant dishwasher installation.
Details of included accessory parts, such as care manuals, quick guides, and warranty cards.
Contents of the installation kit, including hardware for mounting and electrical connections.
Specifications for custom door panel dimensions for integrated dishwasher models.
Specific hardware provided for attaching the toe panel and base access panel.
Required cabinet dimensions and clearances for proper dishwasher fit and operation.
Instructions for creating necessary openings for electrical, water, and drain lines.
Details on voltage, frequency, current, and power consumption for the dishwasher.
Guidance on positioning and extending the electrical supply cable within the installation area.
Requirements for hot water temperature, pressure, and supply line type.
Procedures for installing shut-off valves and connecting hot water supply lines.
Methods for connecting the dishwasher drain hose to sink plumbing or a waste disposer.
Instructions for installing mounting brackets for securing the dishwasher under the countertop.
Steps for removing the toe panel and base access panel for installation access.
Guidance on correctly installing the 90° elbow fitting for the water inlet connection.
Steps to prepare the electrical junction box, including cover and strain relief removal.
Information on using kits to install custom panels on dishwashers, including panel dimensions.
Specifics for installing custom door panels on fully integrated dishwasher models.
Procedure for driving mounting screws through brackets to secure the dishwasher unit.
Steps to lock the front leg levelers, ensuring the dishwasher remains stable.
How to install the drain hose adaptor and connect it to the drain hose and plumbing.
Overview of four methods for connecting the dishwasher drain hose.
Key considerations for drain hose length, height, and the air vent hose.
Details on connecting the hot water supply using braided hoses or copper tubing.
Precautions and steps for connecting the hot water supply with copper tubing.
Essential steps for grounding the dishwasher to ensure electrical safety and compliance.
Procedure for installing the strain relief plate and securing the electrical cable.
Important warnings regarding electrical connections to prevent fire hazards.
Step-by-step guide for securely connecting electrical wires using wire nuts.
Instructions for adjusting spring tension to ensure the door opens and closes smoothly.
Method for installing the standard toe panel using the provided installation kit screws.
Steps for installing the plastic base access panel and metal toe panel on select models.
Critical warning about potential explosive hydrogen gas in unused hot water systems.
Final steps to power up the dishwasher and run a test cycle to confirm operation.
Guidance on self-help troubleshooting and when to contact authorized service personnel.
Information on how to contact customer service for assistance, including required details.
