8 9
Q: Why is food remaining on dishes after I run the cycle?
A: It is possible the dishes do not have adequate clearance between them.
Also, be sure nothing is blocking spray arm and that the lter is clean. Select an
intensive cleaning cycle.
Q: Why does the cycle run a long time?
A: Sensors in the dishwasher automatically increase the cycle time to ensure a
good wash when heavy soil is detected.
A: Incoming water may not be hot enough and dishwasher has to heat it.
Q: Why is E:XX (X can be any number) displayed?
A: This is an error code. For example E:22 indicates there is water in the sump
because the lter is blocked or needs cleaning. See the Use and Care Manual
for a list of error codes.
MAINTENANCE
Clean surfaces with damp cloth and mild
soap.
NOTICE: Do not use abrasives or bleach
based cleaners. Do not use stainless steel
cleaner on black stainless or anti-nger
print surfaces.
Clean the lter 3-12 times a year, depending
on usage.
It is also recommended to run Machine
Care program to keep the tub clean. It is
accessible through the Home Connect app.
ADJUSTING THE SETTINGS
Tip: The simplest way to change the settings is with the Home Connect
TM
app.
Listed below are some of the most used settings. To see all the settings, refer to
the full online manual or go to Dishwasher » Settings in the Home Connect app.
Setting Factory setting Description
• Water hardness
•:‹‹ - •:‹ˆ
•:‹‹ Setting the water hardness.
§-Rinse Aid
§:‹‹-§:‹‡
§:‹† Dispenses the amount of rinse aid,
which aects drying.
š-Intensive drying
š:‹‹-š:‹‚
š:‹‹/ o Improved drying for glasses and
plastic, by increasing the tempera-
ture and cycle length.
›-Buzzer signal
›:‹‹-›:‹„
›:‹ƒ
The volume of the signal for the end
of cycle.
§“-Factory reset
§“
Restores the factory settings on the
dishwasher.
1. Press the On/O button.
2. Hold down button A (see pages 6-7) to access the settings menu.
3. Press A repeatedly to select the desired setting.
4. Press Start to change the value of the setting.
5. Press A button to save the setting.
Cleaning filter
Cleaning spray arm
FAQs
Tips
Scrape o
food,
but do not
rinse.
Use rinse aid
for better
drying.
Adjust upper
rack as needed
for large items.
PUSH
FOR BEST RESULTS
1
2
3
To Next Page
Loading...
Need help?
General
