Operating the Dishwasher en-us
35
InfoLight
®
While the wash cycle is running, a
light spot shines on the floor under
the appliance door.
Do not open the appliance door until
the light point is no longer visible on
the floor.
If the appliance door is not
completely closed, the light spot
flashes*.
If the appliance is installed at
eye-level, with flush furniture front, the
light point is not visible.
In darkened rooms, some light
scattering may be visible. This is
normal and cannot be changed.
You can switch the Infolight on or off.
To change the setting:
1.
Press the On/Off button (.
2.
Hold down function key # and
press Start button P until the
display 8 indicates š:‹x (x can
be any number). Release both
buttons.
3.
Press function key # until the
display shows ‚:‹‚.
4.
Press the function key 3 to
switch the InfoLight
®
feature on
‚:‹‚ or off ‚:‹‹.
5.
Press Start button P to save
the setting.
Intensive drying
The final rinse uses a higher
temperature which improves the
drying result. The cycle time and
energy usage may be increased.
(Caution if utensils are delicate!)
This feature has two settings:
1.
Press the On/Off button (.
2.
Hold down function key # and
press Start button P until the
display 8 indicates š:x (x can
be any number).
3.
Release both buttons.
4.
Press function key # until the
display 8 indicates the factory
set value š:‹‹.
5.
Press function key 3 to switch
the intensive drying feature on
š:‹‚ or off š:‹‹.
6.
Press Start button P to save
setting.
‚:‹‹ Off
‚:‹‚ On
š:‹‹ Off
š:‹‚ On
To Next Page
Loading...
Need help?
General
