To Next PageTo Next Page
Need help?Do you have a question about the Bosch SHY56A02 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | SHY56A02 |
| Capacity | 13 place settings |
| Energy Efficiency Class | A++ |
| Wash Programs | 6 |
| Control Type | Electronic |
| Number of Options | 4 |
| Drying Class | A |
| Half Load Option | Yes |
Explains the meaning of the warning symbol and its implications.
Lists potential hazards associated with operating dishwashers.
Provides critical safety instructions to prevent personal injury during operation.
Details warnings related to property damage caused by improper water connections.
States that control modules do not require special ESD handling.
Confirms that no CFCs or refrigerants are used in dishwashers.
Addresses emissions and occasional smells from drain connections.
States that dishwashers do not emit carbon monoxide.
Indicates that there are no government compliance issues.
Lists UL certification and Energy Star compliance for dishwashers.
Provides key electrical, water pressure, and motor specifications for the dishwashers.
Explains the structure of current and older model numbers.
Shows the location of the serial number and model label on the dishwasher.
Indicates where wiring and circuit diagrams are stored within the dishwasher.
Details the terms and duration of the limited warranties provided.
References installation instructions for specific placement requirements.
Refers to installation instructions for necessary electrical connections.
Directs users to installation instructions for water and drain hookups.
Guides on the process of removing the dishwasher from its packaging.
Outlines key steps in the installation process, like leveling and handle attachment.
Lists the most common issues users face regarding appearance and operation.
Provides detailed, step-by-step instructions for installing the dishwasher.
Explains the overall operational cycle, including pumps, heaters, and drying.
Details the function and purpose of various internal dishwasher components.
Describes how to access and remove the primary water inlet valve.
Details different water valve models, part numbers, and upgrade information.
Explains how to access the circulation pump by removing the outer door.
Provides steps for safely removing control modules from the fascia panel.
Details the procedure for accessing the heater and NTC temperature sensor.
Guides on how to remove and install the drain pump assembly.
Provides instructions for removing and reinstalling the detergent dispenser.
Explains how to disassemble door latches for integrated dishwasher models.
Describes the location and access method for the aqua sensor.
Explains the function and access procedure for water fill assemblies.
Lists specific button combinations to enter diagnostic test programs.
Details error codes and their meanings for troubleshooting.
Guides on measuring component resistance using diagnostic test programs.
A table outlining common problems, their possible causes, and suggested actions.
Discusses common problems related to specific dishwasher parts.
Troubleshooting steps for issues related to the circulation pump impeller.
Troubleshooting steps for control modules showing a '1' error code.
A flowchart to diagnose and troubleshoot heater-related malfunctions.
Troubleshooting guide for water leaks occurring at the bottom of dishwasher doors.
Explains how to check the PTC pump motor starter for circulation pumps.
Addresses nuisance tripping of thermal protectors on circulation pumps with water switches.
Provides instructions for loosening and replacing circulation pump impellers.
Lists part number updates for circulation pumps in specific model series.
Discusses issues with heater relays on control modules and their replacement.
Explains replacing front covers instead of entire modules for button issues.
Details replacing older control modules with newer models and associated parts.
Provides guidance on using alternative heater assemblies for older models.
Describes heater assemblies with motor-operated water switches for flow control.
Details sump part improvements designed to enhance draining performance.
Provides instructions for replacing damaged or detached dispenser doors.
Describes the features and operation of top-load dispensers.
Guides on how to realign misaligned door latches for proper door closure.
Explains how to correct miswired door latches to prevent module damage.
Discusses the updated design of terminal boxes including covers.
Provides resistance values for various components connected to the control module.
Lists resistance values for modules and components on specific models.
Provides resistance measurements for control modules on SHU66C/SHI66A models.
Lists resistance values for modules and components on SHX56B/SHV66A/SHY56/66 models.
Provides resistance measurements for control modules on SHV99/SHX99/SHY99 models.
Lists resistance values for modules and components on SHU/SHI43/53/68 models.
Provides resistance values for modules and components on SHU88/99 and SHV43/48 models.
Lists resistance values for modules and components on SHU33/432x models.
Provides resistance measurements for modules on SHU303x/313x models.
Lists circulation pump resistance values for various SHU and SHV models.
Provides circulation pump resistance values for SHU995x and SHV68 models.
