Need help?Do you have a question about the Bosch SMD8YCX03G and is the answer not in the manual?
General| Model | SMD8YCX03G |
|---|---|
| Category | Dishwasher |
| Capacity | 14 place settings |
| Energy Efficiency Class | A |
| Number of Programs | 8 |
| Drying System | Zeolith Drying |
| Drying Performance | A |
| Cleaning Performance | A |
| Third Rack | Yes |
| Delay Start | Yes |
| Child Lock | Yes |
| AquaSensor | Yes |
| VarioSpeed | Yes |
| Half Load Option | Yes |
| Size | Full Size |
| Programs | Auto, Intensive, Eco, Glass, Rinse |
| Connectivity | Home Connect |
Proper installation to prevent injury; follow manual instructions.
Preventing electric shock through correct installation and connections.
Avoiding fire hazards associated with power cords and adapters.
Risks from moving parts like hinges and appliance tipping, plus chemical hazards.
Dangers from cleaning agents and the risk of explosions from solvents.
Hazards of burns from hot components and scalding from hot water.
Preventing electric shock due to moisture ingress in the appliance.
Dangers of operating a damaged appliance and correct repair procedures.
Hazards of packaging material for children and necessary precautions.
Preventing children from getting trapped or crushed by the appliance.
Proper installation methods to avoid appliance and property damage.
Guidelines for safe operation to prevent damage from steam or improper use.
Key steps for installing the appliance correctly.
Connecting the appliance to the electrical power supply.
Steps for initial appliance setup: salt, rinse aid, settings.
Step-by-step guide to setting the water hardness on the appliance.
Detergents to avoid (hand wash liquid, chlorine).
General advice for self-rectifying minor faults.
Steps to resolve the "Check water supply" fault display.
Error codes E:3000/E:3100 indicating water protection system activation.
Errors E:3200 related to water tap, filters, or supply.
Error E:6103 indicating water cannot be drained.
Procedure to clean the wastewater pump when blocked.
Error E:3400 indicating water continuously running into the appliance.
Error E:9240 indicating filter issues.
Error E:6102 related to the wastewater pump.
Potential software update or electronics fault.
All LEDs lit/flashing indicating an electronics fault.
Problems with rinsing, streaks, or uneven basket heights.
Causes for streaks, rust on cutlery, and salt indicator warnings.
Causes like overcrowding or blocked spray arms.
Problems with rinse aid level or detergent dispenser blockage.
Detergent residue due to blocked spray arms or damp dispenser.
To Next Page
