Bosch SMI4HCS19E - Page 44

deCleaning and care
3
coarse sieve
4.Press the locking lugs together and
remove the coarse sieve
upwards.
Clean sieves
Impurities from the rinse water can
clog the sieves.
1.After each rinse, check the sieves
for residue.
2
1
2.Turn the coarse sieve
counterclockwise and remove the
sieve system.
‒ Make sure that no foreign objects
fall into the pump pot.
2
5.Clean the sieve elements under
running water.
Carefully clean the dirt edge
between the coarse sieve and fine
sieve.
6.Assemble the sieve system.
Please note that the locking lugs on
the coarse sieve are engaged.
1
7.Insert the sieve system into the
device and turn the coarse sieve
clockwise.
3.Pull the micro sieve downwards.
‒ Note that the arrow marks are
opposite each other.
44