Need help?Do you have a question about the Bosch SMI43M15EU and is the answer not in the manual?
General| Door color | Not applicable |
|---|---|
| Cord length | 1.7 m |
| Appliance placement | Semi built-in |
| Control panel color | White |
| Connected load | 2400 W |
| Water consumption per cycle | 10 L |
| Energy consumption per cycle | 0.92 kWh |
| Drying class | A |
| Annual water consumption | 2800 L |
| Annual energy consumption | 262 kWh |
| Cycle time | 175 min |
| Noise level | 46 dB |
| AquaStop function | Yes |
| Delay start (max) | 24 h |
| Number of place settings | 13 place settings |
| Number of washing programs | 4 |
Weight and Dimensions| Depth | 573 mm |
|---|---|
| Width | 598 mm |
| Height | 815 mm |
| Weight | 37000 g |
Read operating and installation instructions carefully for important information on installation, use, and maintenance.
Ensure electrical connection matches rating plate. Damaged power cords must be replaced by authorized service.
Activates a lock to prevent accidental programme changes or termination, indicated by 'EL' on display.
Dispose of plastic parts sorted by type, following safety instructions under 'Delivery'.
Dispose of old appliances according to safety instructions under 'Disposal of your appliance'.
Identifies buttons and displays on the control panel, with reference to diagrams in the envelope.
Lists and identifies numbered components within the appliance interior, referencing diagrams in the envelope.
Adjusts the water softening system based on tap water hardness to ensure optimal washing results.
Refill the salt dispenser before switching on, ensuring overrun solution is washed out to prevent corrosion.
Combined detergents with salt can omit special salt up to 21° dH; over this, special salt is required.
Switch off the salt refill indicator by setting the water softening system to H:00.
Adjusts the amount of rinse aid dispensed for optimal drying results, based on observed streaks or water stains.
Switch off the rinse aid refill indicator by setting the rinse aid amount to 7:00.
Lists materials and items not suitable for dishwashing due to damage or discoloration risks.
Explains causes of damage to glassware and utensils, including glass type, detergent chemistry, and water temperature.
Provides instructions on how to place utensils securely and ensure proper spray arm rotation.
Recommends emptying from the bottom up and allowing utensils to cool to prevent shock and steam damage.
Instructions for opening the dispenser, pouring detergent, and closing the cover securely.
Details on 3-in-1 and other combination detergents, their limitations, and when to add salt and rinse aid.
Reduces running time by 20-50% by increasing water and energy consumption for faster cleaning.
Saves water, energy, and time when washing only a few items. Recommended to use less detergent.
Increases cleaning temperature for improved hygiene status, ideal for items like chopping boards and baby bottles.
Intensifies spray pressure and rinsing temperature in the lower basket for very soiled items.
Increases final rinse temperature and extends drying phase for better drying of plastic parts.
Steps to turn on the tap, switch on the appliance, and start the default Eco 50° programme.
Indicates the estimated time remaining for the selected programme, which can vary based on conditions.
Allows delaying programme start in 1-hour steps up to 24 hours. Can be deleted by setting to H:00.
Indicates programme end with '0:00' on the display. Appliance may switch off automatically.
Adjusts the automatic disconnection time after programme end from 1 minute to 120 minutes.
Steps to turn off the appliance using the ON/OFF switch and turning off the tap.
Procedure to temporarily stop the programme, save its state, and resume later.
How to cancel the current programme and reset the appliance, indicated by '0:00' on the display.
Programme cannot be changed after starting; reset is required to select a new programme.
Regular checks of spray arms, door seals, and general appliance condition, including cleaning recommendations.
Instructions for checking and cleaning the coarse filter, fine filter, and microfilter to prevent pump blockages.
Instructions for checking and cleaning spray arms for blockages caused by limescale and contaminants.
Steps to clear blockages in the waste water pump, including safety precautions and component removal.
Instructions on how to find and state the appliance number (E-Nr.) and production number (FD) for service.
Lists items included in the product package, such as the dishwasher, instructions, warranty, and accessories.
Provides detailed technical data including weight, voltage, power, water pressure, and capacity.
Steps for connecting the waste-water hose to the siphon, ensuring no kinks or blockages.
Procedure for connecting the water supply hose, ensuring it is not kinked, crushed, or twisted.
Details on connecting to hot water supply, recommended temperatures, and energy-saving benefits.
Guidelines for connecting the appliance to the power supply via a suitable socket and circuit breaker.
Steps to safely disconnect the appliance from power, water, and waste connections before removal.
Instructions for draining the appliance and transporting it upright to prevent damage.
Procedure to empty the appliance completely if stored in a room at risk of frost.
To Next Page
