EasyManua.ls Logo

Bosch SMI53M75EU User Manual

Bosch SMI53M75EU
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
XXXCPTDIIPNFDPNXFMDPNF
3FHJTUFSZPVSOFX#PTDIOPX
%JTIXBTIFS
FO*OTUSVDUJPONBOVBM
SM…
SB…

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Bosch SMI53M75EU and is the answer not in the manual?

Bosch SMI53M75EU Specifications

General IconGeneral
Appliance placementBuilt-in
Product sizeFull-size
Built-in displayYes
Inlet hose length1.5 m
Outlet hose length1.5 m
Number of place settings13
Noise level46 dB
Number of washing programs6
Drying systemHeat exchanger
AquaStop functionYes
AquaSensor functionYes
Self-cleaning filterYes
Remaining time indicationYes
Delayed start timerYes
Delay StartYes
Delayed start (max)24 hours
Salt indicatorYes
Rinse aid indicatorYes
Upper basket adjustable heightYes
Energy efficiency classA++
Power consumption (off)0.1 W
Current10 A
Width60 cm
Weight43 kg
ColorWhite
Half Load OptionYes
Drying ClassA
ProgramsAuto, Eco, Intensive, Quick, Glass
Cycle time195 min
Water consumption per cycle9.5 L
Depth55 cm
Height815 mm
Water Consumption9.5 L
Washing programsIntensive, Quick

Summary

Safety Instructions

Before You Switch ON the Appliance

Read the operating and installation instructions carefully for important information on installation, use, and maintenance.

Damage

Appliance must be repaired by technicians only. Disconnect power supply if damaged, especially fascia or door function.

Risks to Children!

Keep children away from detergents, rinse aid, and the appliance. Beware of suffocation and chemical burns.

Installation and Connection

Technical Specifications

Details weight, voltage, connected load, fuse, power input, water pressure, inlet rate, water temperature, and capacity.

Installation

Level appliance with adjustable feet. Secure built-under or integrated appliances to prevent overturning.

Waste-water Connection

Connect waste-water hose to siphon. Ensure hose is not kinked, crushed, or twisted, and no cover plate obstructs flow.

Drinking Water Connection

Fasten connection to tap, ensure it's not kinked. Use new supply hose when replacing. Water pressure: 0.05-1 MPa.

Electrical Connection

Connect to AC 220-240V, 50/60Hz via socket. Socket must be accessible. Consider allpole disconnector if plug is not accessible.

Water Softening System/Special Salt

Setting

Set the salt dispensing level (H:00 to H:07) based on tap water hardness using the provided table.

Using Special Salt

Refill salt compartment before switching on. Use dishwasher salt, not table salt or tablets.

Rinse Aid

Using Rinse Aid

Pour rinse aid up to the max mark in the filler opening and close the cover securely.

Utensils

Loading the Dishwasher

Remove food remnants, place utensils securely, openings down, and ensure spray arms are not obstructed.

Adjusting the Height of the Basket

Adjust upper basket height to fit tall utensils in upper or lower basket. Provides more space.

Detergent

Adding Detergent

Open dispenser lock, pour detergent into dry dispenser, close cover. Dosage: 20-25 ml for normal soiling, one tablet for tablets.

Overview of Programmes

Additional Options

Operating the Appliance

Switching on the Appliance

Turn on tap, switch on ON/OFF, select Eco 50° (default), press START. Eco 50° is environmentally friendly.

Cleaning and Maintenance

Filters

Filters keep large objects from the pump. Check and clean filter system after each wash cycle.

Spray Arms

Limescale can block nozzles. Check, unscrew, and clean spray arms under running water.

Fault, What to Do?

Waste Water Pump

Food remnants can block the pump. Disconnect power, remove baskets/filters, scoop water, remove pump cover, check impeller, replace cover, reinstall filters/baskets.

Check Water Supply Display Faults

Remedial actions for error codes E:07, E:12, E:22, E:24, E:25, E:27 and display messages.

Error Code and Indicator Faults

Remedial actions for error codes E:01-E:30, display flashes, and indicator lights.

Utensil Drying and Condition Faults

Remedial actions for utensils not dry, plastic utensils, cutlery, and appliance interior wet.

Food and Detergent Residue Faults

Remedial actions for food remnants, detergent residue, and blocked dispenser covers.

Stains, Limescale, and Residue Faults

Remedial actions for water stains, white coatings, limescale, and tea/lipstick residue.

Coating and Glass Condition Faults

Remedial actions for coloured coatings, discoloured plastic parts, streaks on glass, and clouding.

Appliance Start, Door, and Dispenser Faults

Remedial actions for rust spots, appliance not starting, door issues, and dispenser cover problems.

Programme Interruption and Noise Faults

Remedial actions for programme interruption, striking noises, rattling, and unusual foam formation.

Customer Service

Childproof Lock (Door Lock)

Related product manuals