EasyManua.ls Logo

Bosch SMS2HKW04E - Setting Timer Programming; Starting the Programme; Activating Button Lock; Deactivate Button Lock

Bosch SMS2HKW04E
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
operation en
33
14.4 Setting timer program-
ming
You can delay the start of the pro-
gramme by up to 24hours.
1. Press ⁠.
a "h:01" appears in the display.
2. Use to set the required start
time for the programme.
3. Press ⁠.
a This activates timer programming.
Tip:To deactivate timer program-
ming, press repeatedly until "h:00"
appears in the display.
14.5 Starting the programme
Press .
a The programme has ended when
the display shows "0h:00m".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→"Terminate programme",
Page33
¡ The appliance switches off auto-
matically 1minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
14.6 Activating button lock
The button lock prevents the appli-
ance from being operated accident-
ally or incorrectly while running.
Press for approx. 3seconds.
a The button lock is activated and
will be automatically deactivated at
the end of the programme.
a When the appliance is operated,
flashes on the display.
a The button lock remains activated
with a power failure.
14.7 Deactivate button lock
Press for approx. 3seconds.
14.8 Interrupting programme
Note:When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1. Press ⁠.
a The programme is saved and the
appliance switches off.
2. Press to resume the pro-
gramme.
14.9 Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Press for approx.
4seconds.
a All displays light up.
a As soon as the displays are off,
the display shows "0h:01m" and
the residual water is pumped out.
a The programme is cancelled and
ends after approx. 1minute.
14.10 Switching off appliance
1. Please note the information on
Safe use →Page10.
2. Press .

Table of Contents

Related product manuals