Bosch SMS2ITW08G User Manual

en Installation and connection
12
¡ Mains cable
¡ Quick reference guide
Installing and connecting the
appliance
You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
1. "Follow the safety instructions."
→Page4
2. "Follow the instructions for elec-
trical connection." →Page12
3. Check the Scope of supply and
the condition of the appliance.
4. Consult the installation instructions
for the installation dimensions re-
quired.
5. Make the appliance level using the
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
6. "Install the drainage connection."
→Page12
7. "Install the drinking water connec-
tion." →Page12
8. Connect the appliance to the
power supply.
Drainage connection
Connect your appliance to drainage
connection so dirty water is dis-
charged via the wash cycle.
Installing the drainage connection
1. Consult the installation instructions
supplied for the steps required
here.
2. Connect the wastewater hose to
the outlet connection of the siphon
using the enclosed parts.
3. When doing so, check that the
wastewater hose is not kinked,
crushed or twisted.
4. Also check that there is no cover
in the drainage system preventing
the wastewater from being dis-
charged.
Drinking water connection
Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note
¡ If you are replacing the appliance,
you must use a new water supply
hose.
1. Consult the installation instructions
supplied for the steps required
here.
2. Connect the appliance to the drink-
ing water connection using the en-
closed parts.
Observe the "Technical data"
→Page54.
3. When doing so, check that the
drinking water connection is not
kinked, crushed or twisted.
Electrical connection
Connect your appliance to the power
supply.
Connecting the appliance to the
electricity supply
Notes
¡ Please follow the "Safety instruc-
tions" →Page4.
¡ Connect the appliance to alternat-
ing current only, in the range of
220 - 240V and 50Hz or 60Hz.

Bosch SMS2ITW08G Specifications

General

Door color	White
Cord length	175 m
Control type	Buttons
Product size	Full size (60 cm)
Tub material	Stainless steel
Built-in display	Yes
Inlet hose length	165 m
Lower basket rack	Fixed
Custom panel-ready	No
Outlet hose length	190 m
Appliance placement	Freestanding
Cutlery compartment type	Basket
Current	10 A
Connected load	2400 W
AC input voltage	220/240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Water consumption per cycle	10.5 L
Energy consumption per cycle	0.923 kWh
Cycle time	270 min
Noise level	50 dB
AquaStop function	-
Delay start (max)	9 h
Dishwashing programs	Auto 45-65°C, Eco 50°C, Express, Favorite, Intensive 70°C, Pre-rinse
Number of place settings	12 place settings
Number of washing programs	5
Package weight	45300 g
Apps supported	Bosch Home Connect

Weight and Dimensions

Width	600 mm
Height	845 mm
Weight	43800 g