Installation and connection en
13
4.5 Electrical connection
Connecting the appliance to the
electricity supply
Notes
¡ Follow the Safety instructions
→Page4.
¡ Please note that the water safety
system is only functional if there is
a power supply.
1. Insert the non-heating appliance
plug of the power cable into the
appliance.
2. Insert the mains plug of the appli-
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate.
3. Check the mains plug is inserted
properly.
To Next Page
Loading...
