Bosch SMS6ECC00E - 3 Environmental protection and saving energy; 3.1 Disposing of packaging; 3.2 Saving energy; 3.3 Sensors

Environmental protection and saving energy en
11
▶ So as not to scratch the finish on
the appliance, do not use sponges
with a rough surface or abrasive
cleaning agents.
▶ To prevent corrosion, do not use
sponge cloths on dishwashers with
a stainless steel front or rinse such
cloths thoroughly several times be-
fore using them for the first time.
Environmental protection and saving energy
3 Environmental protec-
tion and saving energy
Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
▶ Sort the individual components by
type and dispose of them separ-
ately.
3.2 Saving energy
If you follow these instructions, your
appliance will use less electricity and
less water.
Use the Eco50° programme.
a
The Eco50° programme is en-
ergy-efficient and environmentally
friendly.
→"Programmes", Page19
Change the sensor setting to the de-
fault.
a
Consumption is reduced.
→"Sensors", Page11
3.3 Sensors
The sensors adjust the programme
sequence and strength in the auto-
matic programmes depending on the
level and type of soiling.
The sensor has different sensitivity
settings that can be changed in the
basic settings.
→"Changing basic settings",
Page41
Sensor set-
ting
Description
SE:00 Optimum setting for
a mixed load and
heavily soiled table-
ware. Saves both en-
ergy and water.
SE:01 Adjusts the pro-
gramme strength for
effective removal of
food remnants even
with low soiling
levels. Energy and
water consumption
are adjusted accord-
ingly.
SE:02 Adjusts the pro-
gramme strength for
difficult conditions of
use, e.g. stubborn
dried-on food rem-
nants. Recommen-
ded setting when us-
ing organic or ecolo-
gical detergents con-
taining low levels of
active agents. En-
ergy and water con-
sumption are adjus-
ted accordingly.