Bosch SMS6ZCI16E - Changing Basic Settings; Home Connect

Basic settings en
39
Basic setting Display text Selection Description
Wi-Fi Cn:00 Cn:00 - Cn:01 Switch the wireless network
connection on or off.
Level "Cn:00" switches the
wireless network connection
off.
This basic setting is not
available until you have con-
nected the appliance with
the HomeConnect app.
→"HomeConnect ",
Page40
Remote Start rc:01 rc:00 - rc:02 Activate or deactivate
→"Remote Start ",
Page41.
The following settings are
possible:
¡ With the setting "rc:00",
the function is perman-
ently deactivated.
¡ With the setting "rc:01",
the function can be selec-
ted via the button.
→"Activating Remote
Start ", Page41
¡ With the setting "rc:02",
the function is perman-
ently activated.
This basic setting is not
available until after you have
connected the device with
the HomeConnect app.
→"HomeConnect ",
Page40
Factory setting rE: Start with
Y:ES
Confirm with
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
1
Factory setting (may vary according to model)
15.2 Changing basic settings
Tip:Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
HomeConnect app.
1. Press ⁠.
2. To open the basic settings, press
for 3 seconds.
a The display shows H:xx.
a The display shows ⁠.