aus Additional functions
20
Programme Consumption val-
ues
1) Duration in
hrs:mins
2) Energy con-
sumption in kWh
3) Water con-
sumption in litres
Use Programme se-
quence
¡ 3) 4,0-4,0
7.1 Information for test insti-
tute
Test institutes can request the condi-
tions for comparison tests, e.g. ac-
cording to AS/NZS2007, by sending
an e-mail to dishwasher@test-appli-
ances.com.
These are the conditions for conduct-
ing the tests, however not the results
or consumption values.
The product number (E-Nr.) and the
production number (FD) are required
here. They can be found on the rat-
ing plate on the appliance door.
Open ajar using a block of approxim-
ately 100mm upon completion of
dry test.
7.2 Favourite
You can save a combination of a pro-
gramme and an additional function to
the button.
You can save the programme via the
Home Connect app.
The pre-rinse program is saved to
this button at the factory. Pre-rinse is
suitable for all types of tableware.
The tableware undergoes intermedi-
ate cleaning via cold rinsing.
When programmes have been down-
loaded and on delivery of the appli-
ance, the name of the programme
will be displayed in the app. The dis-
play alternately shows "APP" and the
remaining running time.
Tip:You can use the Home Connect
app to download additional pro-
grammes and save them to the
button.
1
8 Additional functions
You can find an overview of the addi-
tional functions that can be selected
here. Different additional functions,
which can be found on the control
panel of your appliance, are available
depending on the appliance configur-
ation.
Additional
function
Use
SpeedPerfect
¡ The run time is
shortened by 15%
to 75% depending
on the rinse pro-
gramme.
¡ The additional
function can be
activated before
the start of the
programme and at
any time when the
programme is run-
ning.
1
Depending on the appliance specifications
To Next Page
Loading...
