Bosch SMU6HCS01A - Changing Basic Settings

Basic settings aus
37
Basic setting Display text Selection Description
Start programme SP:00
1
SP:00 - SP:01 Set a default programme for when
the appliance is switched on.
¡ With the setting "SP:00", the last
programme selected and the last
additional function selected are
set by default when the appliance
is switched on.
¡ With the setting "SP:01", the
standard programme is set by de-
fault when the appliance is
switched on.
Tone volume SL:02
1
SL:00 -SL:03 Adjustment of tone volume.
Level "SL:00" switches the signal
tone off.
Button volume bL:02
1
bL:00 - bL:03 Set the button volume during opera-
tion. Level "bL:00" switches the but-
ton tones off.
Wi-Fi Cn:00
1
Cn:00 - Cn:01 Switch the wireless network connec-
tion on or off.
Level "Cn:00" switches the wireless
network connection off.
Remote Start rc:01
1
rc:00 - rc:02 Activate or deactivate
→"Remote Start ", Page39.
The following settings are possible:
¡ With the setting "rc:00", the func-
tion is permanently deactivated.
¡ With the setting "rc:01", the func-
tion can be selected via the
button.
→"Activating Remote Start ",
Page39
¡ With the setting "rc:02", the func-
tion is permanently activated.
Factory setting rE: Start with
Y:ES
Confirm with
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1. Press ⁠.
2. To open the basic settings, press
for 3 seconds.
a The display shows ⁠.
3. Press repeatedly until
the display shows the required set-
ting.
4. Press or repeatedly until the
display shows the right value.