en Additional functions
20
a The selected programme and the
additional function will flash.
a flashes.
a The programme and the additional
function are saved.
Tip:To reset the programme, either
use the Home Connect app or reset
your appliance back to the factory
settings.
→"Overview of basic settings",
Page34
Additional functions
Additional functions
Additional functions
You can find an overview of the addi-
tional functions that can be selected
here. Different additional functions,
which can be found on the control
panel of your appliance, are available
depending on the appliance configur-
ation.
Additional func-
tion
Use
SpeedPerfect+
¡ The run time is
shortened by 15% to
75% depending on the
rinse programme.
¡ Energy and water con-
sumption are increased.
If you select this additional
function, "automatic door
opening" →Page34 in
the "o02" setting is deactiv-
ated.
Half Load
¡ Switch on with small
loads.
¡ It is recommended
adding less detergent
to the detergent dis-
penser than for a full
machine load.
¡ The run time is
shortened.
¡ Energy and water con-
sumption are reduced.
Additional func-
tion
Use
EfficientDry
¡ The appliance door
opens automatically
during the drying
phase.
¡ Depending on the basic
setting selected, auto-
matic door opening is
activated or deactivated
by the addional func-
tion. The additional
function button lights
up when automatic
door opening is activ-
ated.
¡ With the setting "o02"
automatic door opening
cannot be deactivated
in the Eco 50 °C pro-
gram.
→"Efficient Dry", Page13
Features
Features
Features
You can find an overview of the pos-
sible features of your appliance and
how to use them here.
These features depend on the model
of your appliance.