Bosch SMV4ECX26E - Basic Settings; Overview of Basic Settings

Basic settings en
35
Basic settings
Basic settings
Basic settings
You can configure the basic settings for your appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting Display text Selection Description
Water hardness H04
1
H00 - H07 Set the water softening system to
your water hardness.
→"Setting the water softening sys-
tem", Page25
Level H00 switches the water soften-
ing system off.
Rinse aid dispensing r05 
1
r00 - r06 Set the amount of rinse aid to be dis-
pensed.
→"Setting the amount of rinse aid",
Page27
Switch the rinse aid system off with
level r00.
Intensive drying d00
1
d00 - d01 The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note:Not suitable for delicate items
of tableware.
Switch Extra Dry on "d01" or off
"d00".
InfoLight I01
1
I00 - I01 Switch InfoLight on or off.
While the programme is running, a
spot of light is projected onto the
floor below the appliance door. This
light will not be visible if the appli-
ance is installed at eye level with the
cabinet front fitted flush. If the appli-
ance door is not completely closed,
the spot of light will flash. The pro-
gramme has ended when the spot of
light is no longer visible on the floor.
Level "I00" switches InfoLightoff.
1
Factory setting (may vary according to model)