What to do if water is not drained from my Bosch SMV4HTX33E?
If your Bosch Dishwasher isn't draining, the wastewater pump may be blocked, so clean it. Also, the wastewater hose could be blocked or kinked, so reposition it to remove any kinks. Check the connection to the siphon and open it if necessary. Make sure the cover of the wastewater pump is secured, so it clicks into position.
Why does the E:32-00 error appear on my Bosch SMV4HTX33E Dishwasher and the water supply indicator light up?
The E:32-00 error on your Bosch Dishwasher, along with the water supply indicator, suggests a problem with the water supply. Ensure that the supply hose isn't kinked and that the water tap is fully turned on. The filters in the water connection of the supply or AquaStop hose may be blocked. In this case, switch off the appliance, pull out the mains plug, turn off the water tap and unscrew the water connection.
What does it mean when E:20-60 lights up alternately on my Bosch SMV4HTX33E?
When the E:20-60 error code appears alternately on your Bosch Dishwasher, it indicates that the appliance has detected a calcified heating element. Descale the appliance and operate the appliance with the water softening system.
What does it mean when E:90-01 lights up alternately on my Bosch Dishwasher?
When the E:90-01 error code appears alternately on your Bosch Dishwasher, it suggests that the mains voltage is too low. Contact an electrician.
General| Type | Built-in |
|---|---|
| Category | Dishwasher |
| Size | Full-size |
| Number of Place Settings | 13 |
| Energy Efficiency Class | C |
| Water Consumption per Cycle | 9.5 L |
| Noise Level | 44 dB |
| Number of Programs | 6 |
| Home Connect | Yes |
| AquaStop | Yes |
| Adjustable Upper Basket | Yes |
| Delay Start | Yes |
| Half Load Option | Yes |
| Child Lock | Yes |
| Programs | Auto, Eco, Intensive, Quick |
| Special Options | Extra Dry |
| Third Rack | Yes |
To Next Page
