Basic settings en
41
Basic setting Display text Selection Description
TimeLight S:01
1
S:00 - S:02 Switch TimeLight on or off.
While the programme is running,
status information is projected onto
the floor below the appliance door
relating to timer programming, the
programme or the time remaining. If
the base panel is pulled forwards or
if the appliance is installed at eye
level with the cabinet front fitted
flush, the display is not visible.
Level "S:00" switches TimeLight off.
InfoLight I:01
1
I:00 - I:01 Switch InfoLight on or off.
While the programme is running, a
spot of light is projected onto the
floor below the appliance door. This
light will not be visible if the appli-
ance is installed at eye level with the
cabinet front fitted flush. If the appli-
ance door is not completely closed,
the spot of light will flash. The pro-
gramme has ended when the spot of
light is no longer visible on the floor.
Level "I:00" switches InfoLightoff.
Tone volume b:02
1
b:00 - b:03 Adjustment of tone volume.
End of programme indicated by an
audible signal tone.
Level "b:00" switches the signal tone
off.
1
Factory setting (may vary according to model)
Changing basic settings
1. Open the appliance door.
2. Press .
3. Hold programme button A and
press repeatedly until the dis-
play shows H:xx.
4. Release programme button A and
.
a Programme button A flashes and
the display shows H:04.
5. Press programme button A re-
peatedly until the display shows
the required setting.
6. Press programme button C re-
peatedly until the display shows
the right value.
You can change several settings.
7. Press to save the setting.
8. Close the appliance door.
To Next Page
Loading...
Need help?
General
