26
Robert Bosch Hausgeräte GmbH
en
How to use your TASSIMO
machine
Important: Fill the water tank exclusively
with cool fresh uncarbonated water every
day for optimum flavour results.
Do not use artificially/chemically softened
water.
! Note:
You may want to change the language
setting for the LC-display. Please proceed
as described in the section “Controls and
displays”.
Your TASSIMO machine is ready for use.
When ready, the a stand-by icon is lit.
Place a suitable cup on the stand
according to the type of drink required.
Adjust the height of the stand if necessary,
or remove it altogether for large cups or
glasses. Make sure the distance between
the top of the cup and the brewing unit is
small to avoid spattering.
Open the brewing unit by lifting the lid.
Select a T DISC and insert it in the
T DISC holder with the printed side down.
Make sure that the ap of the T DISC is
secured in the slot to the right.
Close the brewing unit by pushing the lid
down rmly until it clicks into place.
a Stand-by ashes while the machine
reads the barcode.
O Automatic icon lights up (green) when
your TASSIMO machine is ready to brew
your drink.
Your TASSIMO machine is designed
to make the optimal drink every time. It
automatically brews your favourite drink,
however you can also customise your
beverage with TASSIMO following the
process below.
1. Automatic:
Start the brewing process by pressing
the start /stop button. O Automatic icon
will ash. When the automatic brewing
process is complete, the N Manual icon
lights up. Your drink has been brewed for
optimum avour according to predened
settings.
2. Customised (manual operation):
a. For a stronger taste and a smaller
drink: Start the brewing process by
pressing the start /stop button.
O Automatic icon will ash. Press the
start /stop button at any stage during
the brewing process to stop the process
early and adjust the drink to your
individual taste. Your drink is now ready.
N Manual icon lights up for 20 sec.
►
►
►
►
To Next Page
Loading...
Need help?
General
